Loading ...
Loading ...
Loading ...
Page 11
Operating
Instructions
TO SELECT THE OPERATING MODE:
To choose operating mode, press
Mode button. Each time you press the
button the unit cycles through the modes,
Auto, Cool, Dry, and Fan. The adjacent
indicator light will remain on once the
mode is selected.
The unit will automatically initiate the Energy
Saver function under Cool, Dry, Auto (only
Auto-Cooling and Auto-Fan) modes.
To operate on Auto feature:
• When you set the air conditioner to
AUTO mode, it will automatically select
cooling or fan only operation depending
on what temperature you have selected
and the current room temperature.
• The air conditioner will control room
temperature automatically according
to the temperature you’ve set.
• In this mode, the fan speed cannot be
adjusted, as it’s automatically controlled
according to the temperature setting
and room temperature.
To operate on Fan Only:
• Use this function only when cooling is not
desired, such as for room air circulation
or to exhaust stale air (on some models).
(Remember to open the vent during
this function, but keep it closed during
cooling for maximum cooling efficiency.)
You can choose any fan speed you prefer.
• During this function, the display will
show the actual room temperature,
not the set temperature as in the
cooling mode.
• In Fan Only mode, the temperature is
not adjusted.
To operate on Dry mode:
In this mode, the air conditioner will
generally function as a dehumidifier. Since
the conditioned space is a closed or sealed
area, some degree of cooling will occur.
CHECK FILTER FEATURE:
Press Check Filter button to initiate
this feature. This feature is a reminder
to clean the Air Filter for more efficient
operation. The light will illuminate after
250 hours of operation. To reset after
cleaning the filter, press the Check Filter
button and the light will go off.
ENERGY SAVER FEATURE:
Press Energy Saver button to
initiate this function. This function is
available on COOL, DRY, AUTO (only
AUTO-COOLING and AUTO-FAN) modes
.
The fan will continue to run for 3 minutes
after the compressor shuts off. The fan
then cycles on for 2 minu
tes at 10 minu
te
intervals until the room temperature
is above the set temperature, at which
time the compressor turns back on and
Cooling resumes.
Sleep mode and the unit will continue to
operate as originally programmed. The
Sleep mode program can be canceled at
any time during operation by pressing the
Sleep button again.
C-SENSE FEATURE:(COMFORT SENSE)
This feature can be activated from the
remote control ONLY. The remote control
serves as a remote thermostat allowing
for the precise temperature control at its
location.
To activate the Comfort Sense feature,
point the remote control towards the unit
and press the C-SENSE button. The
remote display is actual temperature at
its location. The remote control will send
this signal to the air conditioner every 3
minutes interval until press the C-SENSE
button again.If the unit does not receive
the C-SENSE signal during any 7 minutes
interval, the unit will beep to indicate the
C-SENSE mode has ended.
Light flashes or
illuminates
c-sense
Loading ...
Loading ...
Loading ...