Loading ...
Loading ...
Loading ...
Page 10
Operating
Instructions
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel as shown below
and all its functions, then follow the symbol for the functions you desire. The unit can be
controlled by the unit control alone or with the remote controller.
TO CHANGE TEMPERATURE
SETTING:
Press
UP ( )/DOWN ( ) button
to change temperature setting.
NOTE
Press or hold either UP ( )/
DOWN ( )
button until the
desired temperature is seen on
the display.
This temperature will be
automatically maintained
anywhere between 62°F (17°C)
and 86°F (30°C). If you want
to display the actual room
temperature, see To Operate on
Fan Only section.
TO ADJUST FAN SPEEDS:
Press to select the Fan Speed
in four steps-Auto, Low, Med or High.
Each time the button is pressed,
the fan speed mode is changed. On
Dry mode, the fan operates on Low
speed automatically.
Air Conditioner Features
UNIT CONTROL
DISPLAYS
TEMPERATURE
OR TIME OR
ERROR CODES
ADJUSTS
TEMPERATURE
OR TIME
REMOTE
SIGNAL
RECEPTO
R
SLEEP MODE
SETS MODE
ACTIVATES
TIMER
TURNS UNIT
ON OR OFF
ADJUSTS
TEMPERATURE
OR TIME
CHECK FILTER
RESET
BUTTON
ENERGY
SAVER MODE
SETS FAN
SPEED
TO TURN UNIT ON OR OFF:
Press ON/OFF button to turn
unit on or off.
NOTE
The unit will automatically
initiate the Energy Saver function
under Cool, Dry, Auto (only
Auto-Cooling and Auto-Fan)
modes.
c-sense
SLEEP FEATURE:
Press Sleep button to initiate the
sleep mode. In this mode the selected
temperature will increase by 2°F/1
(or 2)°C 30 minutes after the mode
is selected. The temperature will then
increase by another 2°F/1 (or 2)°C after
an additional 30 minutes. This new
temperature will be maintained for 7
hours before it returns to the originally
selected temperature. This ends the
Loading ...
Loading ...
Loading ...