Loading ...
Loading ...
Loading ...
25
EN
(4) Set the shutdown time
1 Press the „TIMER SET“ button, the display is off, and the hour starts blinking.
2 Press the „+“ or „-“ to adjust the hour.
3 Continue to press the „TIMER SET“ button, the minute starts blinking.
4 Press the „+“ or „-“ to adjust minute.
(5) Set temperature
Then press the „TIMER SET“ button, and the temperature setting starts blinking. Then
you can adjust the temperature by pressing „+“ or „-“. and “+” button will raise the
temperature, and the “-” will lower the temperature.
Press „TIMER SET“ button to continue setting, and press „OK“ complete the setting.
Important Notes on Timer
• [TIMER ON/OFF] is to control the timer opening and closing
• Note 1: Restart the machine after the power is cut off, the original setting is kept,
but the date and time must be reset.
• Note 2: When the week timer is power on, you should turn on the heating function,
or else when the machine is working again as the timer, there will be only the ame
effect working.
Safety Cut-Off
This appliance is tted with a safety cut-off which will operate if the re overheats (e.g.
due to blocked air vents). For safety reasons, the re will NOT automatically reset.
To reset the appliance, disconnect the appliance from the mains supply for at least 15
minutes. Reconnect to the mains supply and switch on the appliance.
Troubleshooting
Symptom Solution
No operation/no fan. Check fuse by replacement.
Check for safety cut-off operation.
No re effect light. Check the bulb by a qualied electrician.
Loading ...
Loading ...
Loading ...