Loading ...
Loading ...
Loading ...
18
EN
In order to avoid overheating, do not cover or obstruct the heater in any way.
Overheating will result if it is accidentally covered.
Never immerse the product in water or any other liquids.
Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool.
Do not use the appliance outdoors.
Do not use if you have wet hands.
Never use the appliance on or near hot surfaces.
Before cleaning the appliance, ensure it is unplugged from the power and that it is
completely cooled.
Do not clean the appliance with abrasive chemicals.
Never use accessories that are not recommended or supplied by the manufacturer.
It could cause danger to the user or damage to the appliance.
Do not lift the appliance by the front panel.
In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this
appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
Note: This heater is not equipped with a device to control the room temperature. Do
not use this heater in small rooms when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision is provided.
INSTALLATION
Hints on Installation
Do not connect the appliance until properly xed to the wall and the instructions is
read fully.
The minimum distances must be observed.
For installation of the appliance, care must be taken not to damage concealed
cables.
Please be careful while drilling the holes.
This appliance is designed to be permanently xed to a wall at a minimum height
of 300mm.The wall bracket must be tted horizontally and the cable routed to the
bottom right of the heater.
A height of 600mm from bottom of heater to oor is recommended for optimum
viewing of fuel bed(see Fig.1 for recommend xing dimensions(.
Keep top of heater at least 1000mm away from ceiling or other objects for optimum
heat ventilation.
Loading ...
Loading ...
Loading ...