Loading ...
Loading ...
Loading ...
20
EN
GENERAL USE
Note: The appliance can be operated either by the switches located on the right hand
side of the re or by the supplied remote control.
Manual Operation
• This is done by operating the switches located at the top right hand side of the re.
The standby rocker switch must rst be switched on, the re will beep to indicate that
it is powered up.
• Press the O/I button once to turn on the appliance and re effect. A red indicator
light will show to indicate that the re is ON. Press the O/I button for 3 seconds this
will operate the ame colour setting. Hold the button down until the desired colour
is obtained.
• Press once the 900W button for the low heat settings; press twice to switch off the
heat setting.
• Press once the 1800W button for the high heat settings; press twice to switch off the
heat setting.
Remote Operation
The standby rocker switch located at the right hand side of the
re must rst be switched on; the re will beep to indicate that
it is powered up.
It takes a little time for the receiver to respond to the transmitter.
Do not press the buttons more than once within two seconds
for the re to operate normally.
Loading ...
Loading ...
Loading ...