Loading ...
Loading ...
Loading ...
Page 5 of 17
ASSEMBLY INSTRUCTIONS (continued)
ASSEMBLY INSTRUCTIONS (continued)
5. To reduce possible nuisances, do not mount the fixture
near a heat source like an air conditioner, vent or furnace
exhaust, or in a direction facing any reflecting object or other
light source.
25'
8.0'
12.0'
70'
Where you install your fixture is important:
Be sure the light is mounted straight on the wall
or eave; otherwise, the detection distance may
be limited.
Fig. 6
Fig. 7
Motion
Least sensitive
Motion
Most sensitive
Sensor
Fig. 8
240'
Notes:
1. The sensitivity of the motion sensor will increase as the
environmental temperature gets cooler. You may wish to
make adjustments when the season changes.
For best performance, gently clean the lens with a soft
cloth every 1 or 2 months to assure maximum sensitivity.
2. For best performance, install fixture at least 8 feet above
the ground. At such a height, the fixture will provide a
detection distance of up to 70 feet at 77 degrees
Fahrenheit. (See Fig.6)
3. The sensor detects movement across a detection range
of 240 degrees. (See Fig.7)
4. The sensor will be more sensitive to motion across its
detection path than motion directly towards it. (See Fig.8)
FUNCTION AND OPERATION
ASSEMBLY INSTRUCTIONS (continued)
ASSEMBLY INSTRUCTIONS (continued)
Hardware Information of the Product
191011
5. PHOTOCELL (PC) MODE (nighttime operation only) (See Fig.4)
6. 3Min/10Min dual timer
continue to stay on for 10min and so on.
Indicator Light
1. Green light flash. Smart link mode.
2. Green light slowly flash. AP mode.
3. Blue light flash. Connected to router but not internet signal.
4. Blue light. Connected to the internet with internet signal.
5. Red light flash. Factory reset mode.
Reset Button
1. Press twice within 5 seconds. Smart link mode.
2. Press and hold for 5 seconds then release.
AP mode.
3. Press and hold for 10 seconds then release.
Factory reset mode.
Loading ...
Loading ...
Loading ...