Loading ...
Loading ...
Loading ...
It is very important that the air compressor
is positioned so that there is adequate airflow
around the machine. There must be at least
2 feet of obstacle-free space surrounding and
above the air compressor.
Use on Flat Surface
For proper operation, the air compressor must
be placed on a flat surface with an incline no
greater that 15 degrees.
Compressor Location
Maintain a Clear Area
WARNING:
EXPLOSION, FIRE
Use caution to minimize risk of fire or
explosion.
It is normal for the air compressor motor
and pressure switch to produce sparks
while operating. If sparks come in contact
with vapors from gasoline or solvents,
they may ignite and cause a fire or
explosion.
Abrasive tools such as grinders, drills and
others tools are capable of making sparks
that can ignite flammable materials.
Always operate the air compressor a safe
distance away from flammable items. Use
in well- ventilated areas.
Never exceed the maximum rated
pressure.
page 8
PRE-OPERATION CHECKLIST
WARNING:
RISK TO BREATHING
Dust or dust-like particulates caused by
power-sanding, sawing, grinding, drilling
or any other construction-like activities
can contain contaminants that are harmful
to breathe.
Always use your air compressor in a
well-ventilated and clean area. Never
breathe the air that comes directly out
of the air compressor or air hose. This air
is not suitable for breathing. Always wear
approved safety equipment. When
performing dust-creating activities,
securely wear properly-fit face masks or
respirators. If you feel ill from breathing
while operating your air compressor, stop
and seek medical attention immediately.
Use in Areas with Clean Air
Electrical power
For proper operation and to maximize the
longevity of the air compressor, it is very
important that the air drawn into the air
compressor is clean. The air compressor
should not be used in areas where dust or
particulates are in the air. This will damage
the motor and impair proper operation.
Important: Always use the air filter, properly
installed.
Electrical power requirements
There is a danger of
DANGER:
electric shock.
Use only undamaged electrical cords.
DO NOT touch bare wire or receptacles.
DO NOT operate air compressor in wet
weather or in wet conditions.
DO NOT touch air compressor or cords if
hands or feet are wet. Ensure that all
cords are free of damage before
connecting to the power supply. Ensure
that you have a sufficient electrical supply
for supporting the requirements of the
motor. Improper installation of the
grounding plug can result in electric
shock. When repair or replacement of the
cord or plug is required, do not connect
the grounding wire to either flat terminal.
The wire with insulation having an outer
surface that is green with or without
yellow stripes is the grounding wire.
This product must be grounded. In the
event of an electrical short circuit,
grounding reduce the risk of electrical
shock by providing an escape wire for the
electric current.
This product is for use on a nominal 120-V
circuit and has a grounding plug similar to
the plug illustrated in FIG. 1.
Only connect the product to an outlet
has the same configuration as the pug.
Do not use an adapter with this product.
Loading ...
Loading ...
Loading ...