Loading ...
Loading ...
Loading ...
WARNING:
HOT SURFACE, FIRE
Air compressor surfaces become hot
during operation.
DO NOT touch hot surfaces, because they
can cause severe burns.
Do not touch the air compressor’s cylinder
head.
During operation, the cooling fins of the
cylinder head and delivery pipe become
hot.
Allow the air compressor to cool before
touching it.
DO NOT place a storage cover on the unit
during operation. Only place a cover on
the air compressor after it has thoroughly
cooled down.
WARNING:
FLYING OBJECTS
Flying objects can cause injury to the
eyes, head and other parts of the body.
Air-powered equipment and power tools
are capable of propelling items (metal
chips, fasteners and particulates) at high
speed into the air and could result in
injury. Always wear approved head
and eye protection.
Never point the air stream at any part of
your body, or at another person or animal.
When operating the air compressor, make
sure all other people and animals maintain
a safe distance.
Do not move the air compressor when the
air tank is under pressure.
page 10
OPERATING THE AIR COMPRESSOR
automatically turn the power off. This
indicates the compressor is working normally.
2. Turn the power switch to the Off position,
unplug the power supply cord and release the
air in the tank by pulling on the safety valve.
At this point proceed to the next step
(daily operations).
NOTE: If the Air Compressor is not working
properly, the pressure gauge will indicate that
there is a decrease in pressure in the air tank.
If there is an air leak from the compressor the
pressure in the air tank decreases, the
pressure switch resets and the motor
automatically turns back on.
If you detect an air leakage, turn the power
switch to the Off position, release the air from
the tank by pulling on the safety valve. Unplug
the power supply cord and contact Customer
Support for Assistance.
Never use the air hoses to pull or move
the air compressor.
Keep the air compressor on a flat surface.
Starting the compressor:
1. Turn the power switch to the OFF position.
2. Attach the air hose to the 1/4” quick
connect coupler.
3. Close the drain valve.
4. Have air filter attached.
5. Plug the power supply cord into a power
supply socket.
6. Turn the power switch to the ON position.
7. Let the motor run and tank fill until motor
turns off.
8. To regulate the air flow.
While the air compressor is running, turn “On”
your tool and turn the regulator knob to the
right increasing the pressure. Turn the
pressure up until the desired pressure is
reached.
9. Operate air tool normally.
Daily Operation
Shutting down the compressor:
1. Turn the power switch to the OFF position.
2. Unplug the power supply cord.
3. Reduce the pressure and moisture from
the air tank by opening the drain valve.
Loading ...
Loading ...
Loading ...