Loading ...
Loading ...
Loading ...
Page 4
SAFETY INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
READ ALL INSTRUCTIONS
BEFORE USING (THIS POWER
TOOL)
WARNING
Read and
understand all instructions before using
this product. Failure to follow all
instructions listed below may result in
electric shock, re, and/or serious
personal injury. When using an electrical
appliance, basic precautions should
always be followed, including the
following:
WORK AREA SAFETY
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
• Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Do not expose power tools to rain or
wet conditions.
Water entering a power
tool will increase the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication.
A lapse of attention while
operating power tools may result in serious
personal injury.
• Use personal protection. Always wear
eye protection.
Protective products such
as dust mask, non-skid safety shoes,
hard hat or hearing protection used
appropriately will reduce personal injuries.
• Prevent unintentional starting. Ensure
the switch is in the off position before
connecting to power source and/or
battery pack and when picking up or
carrying the tool.
Carrying power tools
with your finger on the switch or energizing
power tools that have the switch on invites
accidents.
• Remove any adjusting key or wrench
before turning the power tool on.
A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
• Do not over-reach. Keep proper
footing and balance at all times.
This
enables better control of the power tool in
unexpected situations.
• Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts.
Loose clothes, jewellery or long hair
can be caught in moving parts.
• If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used.
Use of
dust collection can reduce dust related
hazards.
• Use only Masterforce Batteries: BAB726 or
other BAB series
.
• Use only Masterforce Charger: CAB809 or
other CAB series.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch
does not turn it on and off.
Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
• Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools.
Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
Loading ...
Loading ...
Loading ...