Masterforce 2000094ME 18" 80-Volt Brushless Cordless Chainsaw

OPERATOR’S MANUAL - Page 11

For 2000094ME.

PDF File Manual, 24 pages, Read Online | Download pdf file

2000094ME photo
Loading ...
Loading ...
Loading ...
Page 10
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the product and any
accessories from the box. Make sure that all
items listed in the package contents section
are included.
Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
Do not discard the packing material until you
have carefully inspected and satisfactorily
operated the product.
If any parts are damaged or missing, please
call 1-844-MSTR4CE (844-678-7423) for
assistance.
ADD THE BAR AND CHAIN OIL
WARNING
To prevent accidental
starting that could cause serious personal
injury, always remove the battery pack from
the tool when assembling parts.
Examine the amount of oil in the machine. If
the oil level is low, add the bar and chain oil as
follows.
IMPORTANT: Use bar and chain oil that is
only for chains and chain oilers.
NOTE: The machine comes from the factory
without bar and chain oil.
1. Loosen and remove the cap (A) from the oil
tank.
2. Put the oil into the oil tank.
3. Monitor the oil indicator (B) to make sure that
no dirt gets into the oil tank while you add
the oil.
4. Put the oil cap on.
5. Tighten the oil cap.
6. The whole oil tank will last for approximately
20- 40 minutes.
A
B
C
H
A
I
N
L
U
BRICAN
T
INSTALL THE BATTERY PACK
WARNING
Follow these instruc-
tions in order to avoid injury and to reduce the
risk of electric shock or re:
If the battery pack or charger is damaged,
replace the battery pack or the charger.
Stop the machine and wait until the motor
stops before you install or remove the
battery pack.
Read and understand the instructions in the
battery and charger manual.
To install the battery pack
1. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2. Push the battery pack into the battery
compartment until the battery pack locks
into place.
3. When you hear a click, the battery pack is
installed.
To remove the battery pack
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
Battery release button
FIG. 1
FIG. 2
Loading ...
Loading ...
Loading ...