Loading ...
Loading ...
Loading ...
EN
W415-0297 / R / 02.23.21
17
fi nishing
Combustible mantel clearance can vary
according to the mantel depth. Use the
graph to help evaluate the clearance
needed.
Remove the backing of the logo supplied and place on the screen cover, as
indicated.
8.5 glowing embers
Tear the embers into pieces and place along the front row of ports covering all of the burner area in front of the
small logs. Care should be taken to shred the embers into thin, small irregular pieces as only the exposed edges
of the fi bre hairs will glow.
NOTE: The ember material will only glow when exposed to direct fl ame; however, care should be taken
to not block the burner ports.
Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. PHAZER
TM
logs
glow when exposed to direct fl ame. Use only certifi ed “glowing embers” and PHAZER
TM
logs available from your
Napoleon dealer.
8.6 minimum mantel clearances
8.7 logo placement
!
WARNING
• Risk of fi re. Maintain all specifi ed air space clearances to combustibles. Failure to comply with these instructions
may cause a fi re or cause the appliance to overheat. Ensure all clearances (i.e. back, side, top, vent, mantel,
front, etc.) are clearly maintained.
• When using paint or lacquer to fi nish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
Loading ...
Loading ...
Loading ...