Loading ...
Loading ...
Loading ...
WARNING:
If any part is broken or
missing, DO NOT attempt to plug in the
power cord, attach the battery, or operate
the tool until the broken or missing part is
replaced. Failure to do so could result in
possible serious injury.
WARNING:
Do not attempt to mod-
ify this tool or create accessories not rec-
ommended for use with this tool. Any such
alteration or modication is misuse and
could result in a hazardous condition lead-
ing to possible serious injury.
WARNING:
Your tool should never
be connected to the power source when
you are assembling parts, making adjust-
ments, installing or removing application
tools, cleaning, or when it is not in use.
Disconnecting the tool will prevent acci-
dental starting, which could cause serious
personal injury.
CONTENTS
Cordless angle grinder, side handle, wrench,
4-1/2” grinding wheel and instruction
manual.
UNPACKING
1. Carefully remove the tool and any
accessories from the box. Make sure that all
items listed in the packing list are included.
2. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
3. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
TO ATTACH THE
BATTERY PACK (FIG. 1)
FIG. 1
Attach
Detach
WARNING:
To avoid the possibility
of accidental starting, always take care not
to activate the trigger switch when you are
attaching the battery pack or performing other
adjustments to the tool.
1. Make sure that the angle grinder is
turned off.
2. Align the raised rib on the battery pack
with the grooves on the bottom of the tool,
and then attach the battery pack to the
angle grinder.
NOTICE: When attaching the battery pack
to the tool, make sure that the raised plat-
form on the pack aligns with the grooves
on the bottom of the tool and that the
latches snap properly into place. Improper
assembly of the battery pack can cause
damage to internal components.
TO DETACH BATTERY
PACK (FIG.1)
1. Make sure that the angle grinder is
turned off.
Page 10
ASSEMBLY
OPERATION
Loading ...
Loading ...
Loading ...