Loading ...
Loading ...
Loading ...
10
NS-BTST21
www.insigniaproducts.com
3 Align the round hole in the platter with the pulley and use your finger to hook
the belt onto the pulley.
4 Place the turntable mat on the platter.
Attaching and adjusting the counterweight
The counterweight on the tone arm adjusts the needle pressure. If the pressure is
too much, sound is distorted. If the pressure is too little, track skipping happens
more frequently.
1 Hold the counterweight with the black number ring on the counterweight
towards you, then slightly push the counterweight into the end of tone arm.
When you hear the second click from the pogo pin on the tone arm, the
counterweight has been installed correctly.
Note: When you want to take out the platter from the turntable, remove the
mat first, then grasp the platter and pull it upward. This is especially important if
you are shipping your turntable to prevent the platter from shaking.
Pulley
Belt
0
0.
5
1
2.5
0
5
5
5
0
0.
5
5
0
0.
5
1
2.5
Counterweight
Tone arm
Black numbering
Loading ...
Loading ...
Loading ...