Loading ...
Loading ...
Loading ...
The Product will automatically calculate the advance time
required to achieve the temperature set in the schedule.
If adaptive start has not been activated the appliance will
only turn on at the programmed ON time.
To Activate or Deactivate this mode, complete the following:
• From AUTO mode press and hold the - and the +
keys for three seconds.
• ECO appears, use the + / - keys to activate and
deactivate the function. The status is indicated by ON
or OFF on the screen.
• Confirm setting using the ENTER key.
Hold 3 sec.
Fig. 10
Key lock
This function can be used to lock the controller keys. To
activate the key lock press the ENTER and MODE keys
simultaneously. The key lock symbol ' ' will illuminate on
the screen.
To deactivate key lock press ENTER and MODE again.
Advance function
The advanced function can be used in AUTO mode to
activate the next scheduled programme block (P1 - P4)
early. To activate this mode, while in AUTO mode, press and
hold the + key for three seconds. ADVANCE will illuminate
on the screen.
To deactivate the ADVANCED function press and hold the +
or - key again for three seconds.
Master reset function
If you hold PROG and ENTER and MODE buttons on power
up, then release them when the LED comes on, the GP timer
will reset all ON/OFF times to 00:00.
The reset should take approximately 3 seconds and the
KEY LOCK function will be on when it is finished.
Use ENTER and MODE buttons together to turn off KEY
LOCK function.
This appliance incorporates a number of safety devices.
In addition to the ‘Important Safety Advice’ section your
attention is drawn to the following:
SAFETY OVERHEAT PROTECTION
The heater is fitted with a thermal cutout which will switch
off the heater should it overheat for any reason. If the
thermal cutout operates, unplug the unit immediately. Allow
the heater to cool down completely and remove the cause
of the over heating.
TILT SWITCH
The product is fitted with a safety tilt switch which will
prevent the heater from working if the heater is accidentally
tipped over in any direction.
If the heater is tipped over while it is hot, disconnect the
power and allow it to cool, then stand the heater back
upright. Reconnect the power - normal operation should
be resumed.
Note: The tilt switch mechanism makes a muted rattling
noise when the product is moved or tilted, this is not a fault,
this noise is normal.
IMPORTANT NOTES
Although this heater is manufactured to comply with the
relevant safety standards, certain types of carpets could
become discoloured by the temperatures under a portable
heater. If you are concerned about this, we recommend
that you contact the carpet manufacturer for guidance.
Alternatively, stand the heater on a suitable base to shield
the carpet – call our Helpline for further advice.
You may notice some parts of the element appearing to
be hotter from time to time because of the variable airflow
through the heater. This does not cause a safety hazard.
The heat outlet grille may become discoloured with use –
this is caused by airborne pollution and is not a fault.
TURBO FAN (SELECTED MODELS)
The turbo fan is used to boost the airflow around the room.
This circulates the heat better and results in a reduced heat
up time and a more even heat distribution.
The turbo fan is controlled by the Control knob.
STORAGE
If the heater is not required for long periods, for example
during the summer, it should be stored in a dry place and
preferably covered to prevent the accumulation of dirt and
dust.
If left unplugged for a long duration, resetting the time and
the programmed settings will be necessary.
CLEANING
WARNING - ALWAYS DISCONNECT THE POWER SUPPLY
BEFORE CLEANING THE HEATER.
Do not use detergents, abrasive cleaning powder or polish of
any kind on the body of the heater.
Allow the heater to cool, then wipe with a dry cloth to remove
dust and a damp cloth (not wet) to clean off stains. Be careful
not to allow moisture in to the heater.
RECYCLING
For electrical products sold within the European
Community.
At the end of the electrical products useful life it
should not be disposed of with household waste.
Please recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice in your country.
If you don't intend to keep the packaging of this product for
later use or storage, please dispose of it in an eco-friendly way,
please dispose of it in your recycling bin or nearest recycling
facility, thank you.
Safety Features
Additional
Loading ...