Loading ...
Loading ...
Version 20190806 Page
3
Step 2: Press the MODE button again to enter the THERMO mode (Fig. 6).
Timer and Thermostat are both available in this mode.
★NOTE: The Thermostat has the priority to turn OFF when the room temperature reach desired set temperature, and it will
turn ON again when the room temperature go below desired set temperature, at the meantime, Timer will keep countdown.
However, once the set time ends, the Timer will turn OFF the entire system and go back to OFF mode (Fig. 4).
Step 3 : Press the MODE button a third time to turn the appliance back OFF again as show in (Fig. 4).
The receiver will
make sound of continuous BEEP for one second (♫~~~~).
Mode sticker is located under the flip cover of transmitter (Fig. 3).
Fig. 3 Mode sticker
Fig. 4 OFF mode
Fig. 5 ON mode
Fig. 6 Thermo mode
Fig. 7
SETTING UP THE TRANSMITTER
Any blinking numbers on the LCD screen indicate the system is awaiting user’s input. Using the “＋” and “－” buttons (Fig. 7)
to increase or decrease the numbers, and press “OK” button to set / confirm. If no change / action is made within 15-seconds,
the system will accept the numbers and finish the
procedure.
SETTING THE CLOCK (Fig.7)
1. Press and hold the TIMER button on the transmitter for three seconds. The hour digit(s) will become blinking.
2. Press the “＋” and “－” button to set.
3. After setting the desired hour, press and release the TIMER button again to set the minutes.
4. Press and hold the TIMER button again for three seconds to finish setting. You can also press the OK button to finish
setting.
CONVERTING ºF / ºC SCALE
The default setting for temperature is ºF. To change the setting from ºFto ºC (or ºC to ºF), first press and hold the “＋” and
“－” buttons on the transmitter simultaneously (Fig. 7). The highest set temperature is 99º Fahrenheit = 37º Celsius.
Loading ...
Loading ...
Loading ...