Loading ...
Loading ...
Loading ...
Insignia NS-DXA2 Digital to Analog Converter Box
24
www.insigniaproducts.com
Specifications
Design and specifications are subject to change without prior notice.
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
Cannot use the converter
box along with my cable
box.
• The converter box works only with over-the-air broadcast television signals, not cable or any
satellite service.
I forgot my four digit
parental control PIN.
• Press Menu > Settings > System Reset to reset the code to 1234. Note that this will restore all
settings back to their original factory settings and a new Channel Scan must be done.
RF Input
Demodulation 8VSB
Frequency Range 54 - 860 MHz
Connector Type F-Type x 1
RF Output
Signal Type NTSC
Connector Type F-Type x 1
Video Output
Signal Type NTSC
Impedance 75 Ohms
Output Level 1Vp-p
Connector RCA x 1
Audio Output
Output Left and Right channel
Impedance 600 Ohms (min.)
Output Level 2Vrms±10%@0dBFS
Connector RCA x 2
Front Panel IR Receiver
3 Key Function Control
Status LED (power and standby)
Remote Control 27 keys
Power Consumption (Product)
Operation 120VAC, 60Hz, 8W (max.)
Standby <0.8W
AC Adapter Specification
Input 100~240VAC, 50~60Hz
Output 5VDC/2.0A/10W
Dimension (W x D x H) 6.9 x 5.3 x 1.3 in. (175 x 135 x 33 mm)
Weight 8.8 oz. (250 g)
Problem Solution
NS-DXA2_14-1402_MAN_V4_ENG.fm Page 24 Wednesday, December 17, 2014 11:38 AM
Loading ...
Loading ...
Loading ...