Loading ...
Loading ...
Loading ...
W415-2000 / F / 04.13.21
EN
40
fi nishing
9.6 safety barrier & glass door installation / removal
!
WARNING
• Glass may be hot. Do not touch glass until cooled.
• If equipped with door latches that are part of a safety system, they must be properly engaged. Do not
operate the appliance with latches disengaged.
• Facing and/or fi nishing materials must not interfere with air fl ow through air openings, louvre openings,
operation of louvres, or doors/access for service. Observe all clearances when applying combustible
materials.
• Before door is removed, turn the appliance off and wait until appliance is cool to the touch. Doors are heavy
and fragile so handle with care.
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the
appliance and must be installed.
Before the glass door can be removed, the safety screen must be removed. Lift the safety screen up and away
from the appliance.
Remove the bottom door trim. Leave a hand on the glass door during entire door removal. The glass door is
secured to the fi rebox with 6 spring latches.
Pull the handles of the latches forward (door latch tool supplied in manual baggie), then lift the latches out from
the door frame to release the of the door. Next, pivot the door forward until the top edge clears the front of the
appliance. Carefully grip the sides of the door lifting it off the appliance.
Reverse these steps to re-install the safety screen and door. Ensure safety screen is installed correctly.
note:
These spring latches make up the spring relief system for
the appliance. Ensure they open freely and close sealed.
A
B
Loading ...
Loading ...
Loading ...