Loading ...
Loading ...
Loading ...
11
Customer Service: 1 (877) 777-8042
Important Tips for Vacuum Sealing
Tips...
4. Center between guidance lines
as bag is inserted.
3. Insert bag slowly and steadily
into sealing channel until the
appliance engages, holding the
bag level to the counter.
2. Keep bag straight and
pull taught.
1. Slide drawer into unit until it clicks into place.
Avoid wrinkles when inserting the bag into the
Vacuum Channel (H).
Wrinkles in seal may cause leakage and allow
air to return into bag. To eliminate any wrinkles
while inserting bag, gently slide bag curl down
into the Vacuum Channel (H), and hold bag with
two hands gently stretching bag flat until vacuum
pump begins. If you find wrinkles after sealing
bag, simply cut bag open and vacuum seal again.
If motor runs for more than 30 seconds without
stopping, consider the following:
If you are vacuum sealing with a bag, make sure
one end of the bag is properly sealed.
(See “How
to Make a Bag From a Roll” on page 9.)
If vacuum sealing with an accessory, check
Handheld Sealer connections to ensure a tight fit.
For Optimal Vacuum Sealing
HOW TO
Loading ...
Loading ...
Loading ...