Loading ...
Loading ...
Loading ...
©2018 Hestan Commercial Corporation
12
EN
GAS CONNECTION - NATURAL GAS (NG)
NOTE: To ensure proper heating performance of this appliance, verify that the gas line supply pressure
is adequate. Use only the gas pressure regulator supplied with this appliance. This regulator is set for
a supply pressure of 7 inch WC (1.74 kPa) to maintain 4 inch WC (1.00 kPa) outlet (manifold) pressure.
Use a minimum 1/2” ID flex hose to prevent gas starvation. Ensure that the service pipe supplying the
side burner is fitted with a shut-off valve conveniently positioned and easily accessible as an emergency
gas shut-off.
Your side burner for use with Natural Gas is supplied with its own regulator which MUST be installed.
If this regulator needs to be replaced, use only the type specified by Hestan for this appliance.
TO CONNECT THE REGULATOR / HOSE ASSEMBLY FOLLOW THE NEXT STEPS:
1. Locate the regulator mounted underneath your side burner.
2. Connect gas supply using a minimum 1/2” diameter flexible (semi–rigid) stainless steel gas hose, no
more than 48” (1.22m) in length. If you plan to inter-connect the side burner with your Aspire Grill,
be sure to use the appropriate fittings and a flexible hose as short as possible to make the connection.
The hose as well as the connectors must comply with the
Standard for Connectors for Outdoor Gas
Appliances and Manufactured Homes, ANSI Z21.75 • CSA 6.27
, and suitable for outdoor installation.
Use the appropriate thread sealant on all connections.
3. Proceed to LEAK TESTING section.
1/2” ID FLEX HOSE,
ELBOW & NIPPLE
(SUPPLIED BY
CUSTOMER)
NAT GAS
REGULATOR
INCOMING
NAT GAS SUPPLY
SHUTOFF VALVE
(SUPPLIED BY
CUSTOMER)
ASPIRE SIDE BURNER
(MODEL AEB122-NG SHOWN)
GAS AND ELECTRICAL CONNECTIONS
(continued)
Loading ...
Loading ...
Loading ...