Loading ...
2-BUTTON ON/OFF TRANSMITTER (FIG. 2)
IMPORTANT: The transmitter requires two AAA-size 1.5V batteries (excluded). New (fully charged) batteries are
required for proper functionality of the system. Insert batteries into the transmitter battery compartment on the back,
positioning the (+) and (-) ends of the batteries as indicated on the casing.
The TR1001 equips a 2-botton remote transmitter handset. Please press the button on transmitter firmly and slowly to
allow the receiver box to decode the ON / OFF signal for proper program execution. The time interval between
pressing ON and OFF should be at least 3 seconds.
The LED signal light should illuminate when either the ON or OFF button is pressed. If the signal light does not
illuminate, check the position of the transmitter’s battery, and if the battery is fully charged.
Fig. 2 Transmitter Handset
REMOTE RECEIVER BOX
The remote receiver box requires four AA-size 1.5V batteries (excluded) (Fig. 3). When LOW battery icon appears on the
screen, please replace batteries.
The remote receiver box equips the microprocessor that receives the signals / commands from the transmitter in order to
control system operations / functions. It makes sounds of quick BEEP X 2 (♫, ♫) when it receives an “ON” command,
and makes sound of continuous BEEP for one second (♫~~~) when it receives an “OFF” command manually.
The remote receiver box has a 3-position slide switch (ON/REMOTE/OFF) and a LEARN button on the front panel
(Fig. 4).
Fig. 3
Fig. 4
Page 2
Loading ...
Loading ...
Loading ...