Loading ...
Loading ...
Loading ...
– 7 –
7. Micro adjustment for perfect level.
8. To mount the handle position the handle on
the trolley and secure it using the 2 screws
(Fig 7).
FIGURE 7
9. The motor trolley is secured during
shipment, please loosen lever before using
(Fig 8).
FIGURE 8
FILLING THE WATER TRAY
AND DRAINING
1. Fill the tray with water between minimum
and maximum water line. Do not add
chemicals or detergents to the water.
2. To drain, remove the plug from the inside of
the tray, the water will flow out or you can
remove the tray and pour the water out
The tray can also be filled with the hose
attached under the water tray with a
gentle flow.
OPERATION
USE ONLY
CONTINUOUS RIM, SEGMENTED, OR
“TURBO” BLADES. USING WOOD SAWING
BLADES, NON-TILE BLADES WITH OPENINGS,
OR ANY OTHER CUTTING DEvICES WITH
THIS TILE SAW COULD RESULT IN SERIOUS
PERSONAL INJURY AND DAMAGE TO THE
SAW.
MAKING A STRAIGHT CUT
1. Push the motor trolley away from the
operator until it reaches the stroke limit.
2. Position the tile on the cutting table.
3. Properly set the measuring guide and
squaring tool (Fig 9).
FIGURE 9
4. Pull the motor trolley slowly towards the
material to be cut (Fig 10).
FIGURE 10
6. When you have completed the cut push
motor trolley/blade away and remove the
cut pieces, and any debris on cutting
surfaces.
Loading ...
Loading ...
Loading ...