Dyna Glo KFA220DGD USER’S MANUAL AND OPERATING INSTRUCTIONS

Loading ...

Figure 21. Replacing Fuse

10. REPLACING FUSE

NOTICE : This heater is fuse protected.

If your heater fails to ignite, DO NOT RETURN YOUR HEATER TO THE

STORE.

Please follow the simple instructions below to inspect and change the fuse.

WARNING : SHOCK HAZARD

To prevent personal injury, unplug the power cord before replacing fuse.

1. Unplug heater.

2. Remove side cover screws using medium phillips screw driver.

3. Disconnect switch wires from power switch.

4. Remove fuse from fuse holder.(See Figure 21.)

5. Replace fuse with enclosed fuse.

WARNING : FIRE HAZARD

  Toavoidre,Donotsubstitutewithahigherorlowercurrentrating.

6. Replace switch wires to power switch.

7. Replace side cover.

 NOTE:Speciedfuserating:AC125/8A

PROCEDURE FOR REPLACING FUSE

Fuse Holder

KFA80DGD/135DGD/180DGD/220DGD Models

KFA50DGD

Fuse

Switch Wire

Power Switch

Side Cover

Screw

NEVER LEAVE THE HEATER

UNATTENDED WHILE BURNING!

Loading ...

Dyna Glo KFA220DGD Dyna-Glo Delux 220,000 BTU Portable Forced Air Kerosene Heater