Loading ...
Loading ...
Loading ...
9
Empty the dust canister (15) regularly even if it
d
oes not look full, this will maintain the
p
erformance.
T
o ensure optimum suction and performance, we
recommend that the canister is only filled to the
l
ine shown on the side of the canister.
The dust canister can be quickly emptied whilst
still attached to the handheld vacuum cleaner
(13). To do this, use the dust canister swing base
release catch (17) to open the dust canister swing
base (16).
Empty the dirt from inside the dust canister and
push the swing base closed again.
T
he guarantee may be invalidated if the motor
is damaged due to: using the appliance
w
ithout the filter(s) installed; not cleaning the
filter(s); or not replacing a damaged filter.
Cleaning the dust canister filter
To maintain suction, the perforated cyclone
f
ilter in the dust canister must be cleaned
d
uring each dust canister empty.
If the perforated cyclone filter becomes clogged,
it may be necessary to remove the dust canister
to clean it (follow steps below).
1
.
Remove the extension tube (18), motorised floor
brush (26) or crevice tool (24) from the handheld
vacuum cleaner (13) by pressing the extension
tube release button (10) and pulling the accessory
away.
2
.
Press the dust canister release button (9) and
twist the dust canister (15) by pushing the
handheld vacuum cleaner suction inlet (11)
clockwise (if viewing it from above).
3. Remove the dust canister. Brush the perforated
cyclone filter gently to remove any hairs or fibres.
4. When refitting the dust canister, locate it into the
correct position before rotating back into the
locked position.
Maintenance - canister filter
Maintenance - emptying
the dust canister
VC731007MUK Rev1.qxp_Instruction Book 12/12/2017 09:38 Page 9
Loading ...
Loading ...
Loading ...