Loading ...
Loading ...
Loading ...
10
T
he guarantee may be invalidated if the motor
is damaged due to: using the appliance
w
ithout the filter(s) installed; not cleaning the
filter(s); or not replacing a damaged filter.
Cleaning the main filter(s)
To maintain suction, the main filter(s) must be
c
leaned each time the dust canister
(
15)
i
s
e
mptied.
1
.
Follow ‘Emptying the dust canister’.
1 Press the filter access lid release button (8) and
open the filter access lid (6).
2 Lift out the circular pleated filter (7). Every
month, wash the pleated filter in luke-warm
water and thoroughly air dry before re-fitting.
3 Remove the tubular foam filter (7a) from the
circular pleated filter
(7). Wash the tubular foam
filter in luke-warm water and thoroughly air dry
before re-fitting.
I
MPORTANT: Do not wash the filter(s) with hot
water or detergents.
I
MPORTANT: Do not use heated appliances to
dry the filter(s).
2. R
eplace the filters into the handheld vacuum
cleaner
(13) and close the filter access lid (6),
e
nsuring it clicks closed.
IMPORTANT: Never use the product without
t
he circular pleated filter
(
7)
a
nd the tubular
foam
(7a) filter fitted.
If the motorised floor brush
(26)
is stalled, eg. by a
foreign object or if used on very deep pile carpet,
switch off, disengage the motorised floor brush
and then remove the cause of the stall. Leave for a
few minutes to allow the floor brush protection to
self reset.
To clean the motorised floor brush, turn the unit
off, press the floor brush release button
(19)
and
pull the motorised floor brush away from the
extension tube
(18)
.
Turn the motorised floor brush
(26)
over to inspect
the rotating brush bar
(26c)
.
Push the locking button
(26a)
on the brush bar
cover
(26b)
forward to unlock the cover.
Maintenance - main filter(s)
Maintenance - motorised
floor brush
1
2
3
7a
7
26b
26c
26a
VC731007MUK Rev1.qxp_Instruction Book 12/12/2017 09:38 Page 10
Loading ...
Loading ...