Loading ...
Loading ...
Loading ...
6
Using in upright mode
Assemble the product for upright vacuum cleaning
(see ‘Upright vacuuming: assembly’, above).
Pressing the On/Off button
(1) will switch the product
on at HIGH power. Press the power button (2) to toggle
the power between LOW and HIGH. Pressing the
On/Off button (1) again will switch the product off.
The HIGH setting will produce the best cleaning results
for the majority of cleaning tasks. Using on LOW power
will be sufficient for light cleaning and will extend the
usage time before the battery needs recharging.
If the motorised floor brush
(26) is fitted, the brush will
rotate and the floor brush light (21) will illuminate.
NOTE: When the fully charged product is switched on,
all three light array bars and the word ON will illuminate
(see charging / power indicator lights
(5)). As the
battery discharges during use, the number of
illuminated bars will reduce until just the word ON is
illuminated. The ON illumination will start to flash when
the battery is almost empty, and within one minute the
product will automatically stop and all lights will
extinguish. The product must then be recharged.
Upright vacuuming: assembly
1 P
ush the neck of the motorised floor brush
(
26)
i
nto
t
he extension tube suction end
(
20)
(
with the female
electrical connector) until it clicks into place,
e
nsuring the electrical connectors marry together.
2 P
ush the extension tube handheld connection end
(
12)
(
with the male electrical connector) into the
handheld vacuum cleaner suction inlet
(11) until it
c
licks into place, ensuring the electrical connectors
marry together.
1
2
VC731007MUK Rev1.qxp_Instruction Book 12/12/2017 09:38 Page 6
Loading ...
Loading ...
Loading ...