Loading ...
Loading ...
Loading ...
14
INSTALLATION
ENGLISH
CAUTION
If your entrance door is too narrow for the
.
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
Use two or more people to remove and
.
install the refrigerator doors. Failure to do
so can result in back or other injury.
Disconnect the electrical supply to the
.
refrigerator before installation. Failure to do
so could result in serious injury or death.
Do not put hands, feet or other objects into
.
the air vents or bottom of the refrigerator.
You may be injured or receive an electrical
shock.
Be careful when handling the hinge and
.
stopper. You may be injured.
Remove food and bins before detaching the
.
doors and drawers.
Removing/Assembling the
Doors and Drawers
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
is the recommended procedure.
CAUTION
When assembling or disassembling the
handles:
Grasp the handle tightly to avoid dropping it.
.
Do not swing the handle into nearby people
.
or animals.
Make sure that the bracket hole of the
.
handle ts properly into the stopper bolt of
the door. Assemble the set screws to x
the handle into place.
Make sure that there is not a gap between
.
the door and handle after assembling the
handle.
Removing/Assembling the
Freezer Drawer Handle
(On Freezer Drawer Models)
Removing the Handle
1
Loosen the set screws located on the
lower side of the handle with a
Allen wrench and remove the handle.
2
Loosen the mounting fasteners that
connect to the
freezer drawer
and handle
using a
(6.35 mm)
1
/
4
in.
Allen wrench,
and remove
the mounting
fasteners.
Assembling the Handle
1
Assemble the mounting fasteners at
both ends of the handle using a
1
/
4
in.
(6.35 mm) Allen wrench.
2
Place the handle on the door by tting
the handle
footprints over
the mounting
fasteners and
tightening the
set screws
with a 3/32 in.
(2.5 mm)
Allen wrench.
ENGLISH
3
/
32
in. (2.5 mm)
Loading ...
Loading ...
Loading ...