Loading ...
Loading ...
Loading ...
Installing and connecting the appliance en
7
Note: Ensure the following:
■ The tap's opening is smooth and
even.
■ The seal is positioned centrally with
respect to the tap opening.
5. Retighten part B.
6. Slide the sliding sleeve downwards
from the snap connector (all balls
must be exposed), insert the snap
connector into the connection socket
and slide it upwards.
Model with hot water supply:
1. Connect the red-marked hot water
supply hose to the hot water tap (¾";
max. 60 °C) and to the red valve on
the appliance, and connect the blue-
marked cold water supply hose to
the cold water tap (¾") and to the
blue valve on the appliance.
2. Carefully turn on the taps and check
that there are no leaks.
Notes
– The threaded connection is
subject to high water pressures.
– Both hoses must be connected in
order for the appliance to work
correctly.
Model without hot water supply:
1. Connect the water supply hose to
the tap (¾") and to the valve on the
appliance.
2. Carefully turn on the taps and check
that there are no leaks.
Note: The threaded connection is
subject to high water pressures.
Water drainage
Caution!
Water damage
When water is being pumped away, the
drain hose is under high water pressure
and may slip out of the wash basin or
connection point.
Secure the drain hose so that it cannot
slip out.
Caution!
Damage to the appliance/laundry
If the end of the drain hose is immersed
in the drained water, water may be
sucked back into the appliance and
may damage the appliance/laundry.
Make sure that:
■ The wash basin outlet is not blocked,
■ The end of the drain hose is not
immersed in the drained water,
■ The water drains away quickly
enough.
Loading ...
Loading ...
Loading ...