User Manual Bosch WOA104X0SG/01 Serie 4 Washing machine

Remove the dispenser from the washing machine according to the instructions in your owner's manual. Place the dispenser under warm, running water and lightly wipe away any remaining detergent residue. Reinsert the dispenser according to the instructions in your owner's manual.

1. Pour 1 container of the Bosch Washing Machine Cleaner into the empty washing machine. 2. Run the hottest cycle. Purchase the Bosch Washing Machine Cleaner in the Bosch Accessories Store.

1. Pour the descaler into the empty washing machine. 2. Run the hottest cycle. 3. Rerun the program for a thorough cleaning. Purchase the Bosch Descaler in the Bosch Accessories Store.

The frequency depends on the usage of the appliance and the hardness of the local water. Be sure to use a descaler if you live in an area with hard water. Purchase the Bosch Descaler in the Bosch Accessories Store. To avoid limescale and odors, regularly give your washing machine a maintenance wash of 194°F (90°C).

After finishing a load, leave the door partially open to air the interior of the machine. This will help dry out any remaining moisture in the drum or on the gasket. Wipe the gasket with a soft cloth to remove residual water or detergent. Any leftover detergent on the gasket means that you are using too much detergent.

This is necessary if very little or no water flows into the washing machine. In hard water areas, cleaning is recommended every 6 months to reduce valve blockages. The strainers are located at the ends of the two water supply hoses. Always refer to your owner's manual for specific cleaning instructions for your model. 1. Turn off the machine's water supply. 2. To clean the strainers at the water faucet end of the hoses, disconnect the hoses from the water faucets. 3. Rinse the strainers under running water. 4. Reconnect the hoses and strainers to the water faucets. 5. To clean the strainers at the machine end of the hoses, remove the hoses from the inlets on the back of the machine. 6. Use narrow pliers to grasp and pull the strainers from the inlet ports. 7. Rinse the strainers under running water. 8. Reconnect the hoses and strainers to the back of the machine and turn on the water supply. Check to see if water flows by starting a warm water wash cycle.

Use hot, soapy water or a mild, non-abrasive cleaner with a soft cloth. Rinse and then dry with a soft cloth.