Loading ...
Loading ...
Loading ...
en Installing and connecting the appliance
4
5 Installing and
connecting the
appliance
Install ing and connecti ng the appli ance
Included with the appliance:
1. Remove any packaging and
protective covers completely from
the appliance.
2. Remove the protective film from the
control panel.
3. Remove the appliance from the base
padding.
Note: Operating the appliance on
the base padding is strictly
forbidden.
4. Open the cover on the appliance
and take out all the accessories.
You can now install and connect the
appliance.
Caution!
Risk of material damage/damage to the
appliance
Objects remaining in the drum that are
not designed for operation with the
appliance may result in material
damage and damage to the appliance.
Remove these objects, along with all
accessories, from the drum.
Installing the appliance
:Warning
Risk of injury!
■ The appliance is very heavy. Lifting it
may result in injury.
Do not lift the appliance on your
own.
Risk of injury!
■ The appliance has sharp edges on
which you could cut your hands.
Do not take hold of the appliance by
its sharp edges. Wear protective
gloves to lift it.
Risk of injury!
■ If the hoses and mains cables are
not correctly routed, they may
constitute a tripping hazard, which
may result in injury.
Route hoses and cables such that
they do not constitute a tripping
hazard.
( Water drain hose*
0 Mains cable
8 Water drain hose*
@ Water supply hose
H Second water supply hose
(identified by a red marking) on
models with a hot water supply
hose*
P Snap connector*
X Bottom plate
* Depending on the appliance
specifications
#
+
3
;
Loading ...
Loading ...
Loading ...