Loading ...
Loading ...
Loading ...
INSTALLATION / USE & CARE
|
19
Installation requires an outdoor 120VAC 15A GFI (Ground Fault
Interrupter) electrical outlet adjacent to the grill.
The GFI outlet features an internal breaker that reduces shock
hazard. This type of outlet should be installed by a quali ed
electrician either inside the island enclosure for built-in units, or
near the location where a free-standing unit will be used.
For built-in grills, the supplied 12VDC should be installed below
the grill within the cabinet enclosure. Select a location where
the transformer is protected against water, heat and physical
damage.
When installing the transformer to the grill be careful to
prevent the wiring and transformer from contacting any hot
surfaces behind or below the grill. It is recommended that the
transformer be located below the grill in a readily accessible
location. Be sure to provide adequate access to facilitate
service if the transformer or connections should need future
maintenance.
If the electrical system fails to operate, a connection may have
come loose in shipping or the GFI may have tripped, requiring a
reset. See the Troubleshooting section for more details.
CONNECTION TO AC
ELE
C
TRI
C
AL
CO
NNE
C
TI
O
N
S
• Product installation must meet local electric codes or, in the absence of local codes, the latest edition of the National
Electrical Code ANSI/NFPA No. 70 or the Canadian Electrical Code CGA 1.6b2005.
• Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance.
• IMPORTANT: When connecting your rotisserie motor, rst connect the motor to the grill and then plug the grill into the
outlet.
• This grill is equipped with a three prong (grounding) electric plug for your protection against shock hazard and must be
plugged directly into a properly grounded three prong outlet. Never cut or remove the grounding prong from this plug.
• Use only extension cords with a 3 prong grounding plug, rated for the power of the equipment, and approved for out-
door use with a “W-A” marking.
• To protect against electric shock, do not immerse any part of the power cord, an extension cord or any plugs in water or
other liquid.
• Unplug the product from the outlet when not in use and before cleaning. Allow it to cool before putting on or taking o
parts.
• Do not let the cord hang over the edge of a table or touch hot surfaces.
• Do not use an outdoor cooking gas appliance for purposes other than intended.
• Do not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the appliance malfunctions or
has been damaged in any manner. Contact the manufacturer for repair.
WARNING: ELECTRICAL GROUNDING
Loading ...
Loading ...
Loading ...