Loading ...
Loading ...
Loading ...
3. Push and release the set (S) button on the
memory switch.
4. Within five seconds, push and release either
of the memory buttons (1) or (2). The instru-
ment cluster display will display which
memory position has been set.
NOTE:
• Memory profiles can be set without the ve-
hicle in P ARK, but the vehicle must be in
PARK to recall a memory profile.
• To set a memory profile to your key fob, refer to
“Linking And Unlinking The Remote Keyless
Entry Key Fob To Memory” in this section.
Linking And Unlinking The Remote Keyless
Entry Key Fob To Memory
Your key fobs can be programmed to recall one
of two pre-programmed memory profiles by
pushing the unlock button on the key fob.
NOTE:
Before programming your key fobs you must
select the “Personal Settings Linked To Fob”
feature through the Uconnect system screen.
Refer to “Uconnect Settings” in “Multimedia”
in the Owner’ s Manual for further information.
To program your key fobs, perform the following:
1. Place the vehicle’ s ignition to the OFF
position.
2.
Select desired memory profile (1) or (2). The
system will recall any stored settings for this
profile. Wait for the system to complete the
memory recall before continuing to step three.
NOTE:
If a memory profile has not already been set,
refer to "Programming The Memory Feature"
in this section for instructions on how to set
a memory profile.
3. Once the profile has been recalled, push and
release the set (S) button on the memory
switch, then push and release memory but-
ton (1) or memory button (2) accordingly.
“Memory Profile Set” (1 or 2) will display in
the instrument cluster display .
4. Push and release the lock button on the key
fob within 10 seconds.
NOTE:
Your key fobs can be unlinked from your
memory settings by pushing the set (S) button,
and within 10 seconds push the unlock button
on the key fob.
Memory Position Recall
NOTE:
The vehicle must be in PARK to recall memory
positions. If a recall is attempted when the
vehicle is not in PARK, a message will display in
the instrument cluster display .
To recall the memory settings for driver 1, push
memory button (1) on the driver's door or the
unlock button on the key fob linked to memory
position 1.
NOTE:
If the vehicle is equipped with Passive Entry,
the memory settings will be recalled with a
Passive Entry Unlock into the driver's door using
the key fob linked to position 1.
To recall the memory setting for driver 2, push
memory button (2) on the driver's door or the
unlock button on the key fob linked to memory
position 2.
NOTE:
If the vehicle is equipped with Passive Entry,
the memory settings will be recalled with a
Passive Entry Unlock into the driver's door using
the key fob linked to position 2.
GETTING TO KNOW YOUR VEHICLE
22
Loading ...
Loading ...
Loading ...