Loading ...
Loading ...
Loading ...
4. Place the jack underneath the lift area that is
closest to the flat tire. Turn the jack screw
clockwise to firmly engage the jack saddle
with the lift area of the sill flange.
NOTE:
If the vehicle is too low for jack placement,
slide the jack on its side and rotate it up into
position.
5. Raise the vehicle just enough to remove the
flat tire and install the spare tire.
WARNING!
Raising the vehicle higher than necessary
can make the vehicle less stable. It could slip
off the jack and hurt someone near it. Raise
the vehicle only enough to remove the tire.
6. Remove the lug nuts and tire.
7. Mount the spare tire.
CAUTION!
Be sure to mount the spare tire with the valve
stem facing outward. The vehicle could be dam-
aged if the spare tire is mounted incorrectly .
NOTE:
•
For vehicles so equipped, do not attempt
to install a center cap or wheel cover on
the compact spare.
•
Refer to “Tires—General Information” in
“Servicing And Maintenance” in your
Owner's Manual for additional warnings,
cautions, and information about the spare
tire, its use, and operation.
Rear Jacking Location
Front Jacking Location
Installing Compact Spare
143
Loading ...
Loading ...
Loading ...