Loading ...
Loading ...
Loading ...
23
USING THE TIMER
When the set time is up
The corresponding indicator in the timer display will flash, the timer will beep, and the
cooking zone will automatically turn off. (note: if the surface is still hot the display will
show H).
Touch any control to stop the beeping.
Notes on using the timer
Skip the last step (6) if you want to set the timer to less than 10 minutes.
To modify or cancel a timer setting, follow steps 1 and 2 under ‘To set the timer for a
cooking zone’. The timer display will reset to 00. Adjust the minutes as desired, or leave
at 00 to cancel the timer.
You can also cancel a timer by selecting the cooking zone, and decreasing the heat
setting to 0.
Once you have set the timer for one cooking zone, you can then set it for additional
cooking zones. Repeat the steps above to set the timer for each additional cooking
zone.
When multiple timers are set:
The timer display will always revert to showing the setting for the cooking zone with
the shortest remaining time.
To check the timer setting for a different cooking zone, simply select the cooking
zone. Its remaining time will briefly appear in the timer display.
5 After a few seconds the display will
then indicate for you to set the left-
hand digit.
6 Set the left-hand digit using the setting
selector. The timer display will flash for
a few seconds and then remain steadily
lit. The timer is now set and begins
counting down.
Loading ...
Loading ...
Loading ...