Loading ...
Loading ...
Loading ...
16
CLEANING AND MAINTENANCE
Failure to carry out regular cleaning may cause the
surfaces of the appliance to deteriorate. This in turn
may shorten the service life of the appliance and
cause dangerous situations to arise.
Make sure that the appliance has cooled down before
carrying out any maintenance or cleaning.
Do not use wire wool, abrasive scourers or abrasive/
corrosive cleaning agents, as these could damage the
surfaces of the appliance.
The appliance must be disconnected from the mains
before carrying out any kind of maintenance work.
Wear protective gloves.
Do not use steam cleaners.
EXTERIOR SURFACES
• Clean the surfaces with a damp microfibre cloth.
If they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
• Clean the door glass with a suitable liquid
detergent.
INTERIOR SURFACES
• After every use, leave the oven to cool and then
clean it, preferably while it is still warm, to remove
any deposits or stains caused by food residues.
• To remove the moisture generated by steaming,
leave the oven to cool and then wipe the
compartment with a cloth or the sponge provided.
We recommend using the “Steam Cleaning” function
regularly.
ACCESSORIES
• The majority of accessories can be washed in the
dishwasher, including the shelf guides.
• Clean the tank carefully using a sponge and a little
pH-neutral detergent. Rinse with drinking water.
REPLACING THE LIGHT
• Disconnect the oven from the power supply.
• Unscrew the cover from the light and carefully
remove the seals and the washer.
• Replace the light and screw the cover back on,
taking care to refit the seals and the washer
correctly.
• Reconnect the oven to the power supply.
Please note: Use 10 W/12 V type G4, T300 °C halogen lamps.
The bulb used in the appliance is specically designed
for domestic appliances and is not suitable for general
room lighting within the home (EC Regulation 244/2009).
Lamps are available from our After-sales Service.
Do not
handle bulbs with your bare hands as your ngerprints could
damage them. Do not use the oven until the lamp cover has
been retted.
Loading ...
Loading ...