Loading ...
Loading ...
Loading ...
56
GB
Check that headphones are not connected
to the receiver.
Press (muting) to cancel the muting
function.
Try pressing the input button on the remote
control or turning INPUT SELECTOR on the
receiver to select the input to which you
want to listen.
If you want to listen to sound from the TV
speaker, set [Audio Out] to [TV + AMP] in the
[HDMI Settings] menu. If you cannot play
multi-channel audio source, set [AMP].
However, the sound will not be output
through the TV speaker.
Sound may be interrupted when the
sampling frequency, number of channels or
audio format of audio output signals from
the playback device is switched.
If you are listening with BLUETOOTH
headphones, check that the [Bluetooth
Mode] is set to [Transmitter].
Sound for the center channel is not output
if you set the speaker pattern to a setting
that does not have a center speaker or
when [DSD Native] is set to [On] and a DSD
multi-channel source is being played back.
Sound for surround left/right channels is
not output if you set the speaker pattern to
a setting that does not have surround
speakers or when [DSD Native] is set to [On]
and a DSD multi-channel source is being
played back.
No sound from [USB], [Bluetooth] (only
when [Bluetooth Mode] is set to [Receiver]),
[Home Network], and [Music Service List] is
output to the Zone 2 speakers if you set
[DSD Native] in [Audio Settings] to [On].
When a TV is connected to the receiver via
an HDMI OUT A (TV) jack that supports the
Audio Return Channel (ARC) function, sound
from the TV is not output from the speakers
connected to the receiver.
Set [Control for HDMI] to [On] in the [HDMI
Settings] menu.
Make sure that your TV is compatible with
the Audio Return Channel function.
Make sure that the HDMI cable is connected
to a jack on your TV that is compatible with
the Audio Return Channel function.
Set the Audio Return Channel (ARC)
function of your TV to on.
The surround effect cannot be obtained.
Be sure to select the optimal sound field for
the content. For details on the sound fields,
see “Selectable sound fields and their
effects” (page 49).
[Dolby Surround] and [Neural:X] do not
work when the speaker pattern is set to
[2.0] or [2.1].
The sound lags behind the picture.
When the Wireless Multi-Room function is
activated, the sound may be delayed.
Cannot connect to the network using WPS
via a wireless LAN connection.
You cannot connect to a network using [Wi-Fi
Protected Setup
TM
(WPS)] if your access point
is set to WEP. Set up your network after
searching the access point using the access
point scan.
Cannot connect to the network.
Check that the LAN cable is connected to
the receiver when you want to connect the
receiver to the network via a wired LAN
connection.
Check the network information. If the
connection failed, set up the network
connection again.
If the receiver is connected through a
wireless network, move the receiver and
the wireless LAN router/access point closer
to each other and perform the setup again.
Make sure that you use a wireless LAN
router/access point.
Make sure that the wireless LAN router/
access point is turned on.
Check the settings of the wireless LAN
router/access point and perform the
setup again. For details on the settings of
devices, refer to the operating
instructions of the devices.
Wireless networks are influenced by
electromagnetic radiation emitted by
microwave ovens and other devices.
Move the receiver away from these
devices.
Network connection
Loading ...
Loading ...
Loading ...