Loading ...
Loading ...
Loading ...
40
GB
Setting up the Receiver
using the Easy Setup
To perform initial setup of the receiver, make
sure a TV is connected to the receiver
(page 29). Then, switch the input of the TV to
the input to which the receiver is connected.
It is not possible to perform the Easy Setup
procedure using the indications on the front display
panel.
When you turn on the receiver for the first
time or after the receiver is initialized, the
Easy Setup screen appears on the TV screen.
Follow the on-screen instructions to make the
basic settings using / / / and .
If the Easy Setup screen does not appear or
you want to display the Easy Setup screen
manually, you can display it by pressing
HOME, then select [Setup] – [Easy Setup].
By performing Easy Setup, you can complete:
1: Language selection
2: Speaker settings
Check your speaker system and perform
Auto Calibration according to the
configuration and arrangement of your
speaker system.
3: Internet settings
Select the network connection method and
configure settings to connect the receiver
to the network.
Before you perform Auto
Calibration
Disconnect the headphones.
Remove any obstacles between the
calibration microphone and the speakers.
Auto Calibration is not available when
[Bluetooth Mode] is set to [Transmitter].
For accurate measurement, make sure the
environment is quiet and free from noise.
Set the speaker output to a setting other
than ”SPK OFF.” See “Selecting the front
speakers” (page 41).
Confirm the active subwoofer setup
Before using a subwoofer, turn on the
subwoofer and turn up the volume. Turn
the LEVEL to just before the mid-point.
When a subwoofer with a crossover
frequency function is connected, set the
value to maximum.
When a subwoofer with an auto standby
function is connected, set it to off
(deactivated).
Depending on the characteristics of the
subwoofer you are using, the setup distance
value may be different from the actual position.
Note
Easy Setup
Welcome!
: Choose
: Go back
: Continue
: Apply the selection
Select your language.
English
Español
Français
Deutsch
Setup
Easy Setup
Restarts Easy Setup to configure basic settings. Follow the on-screen instructions.
Speaker Settings
Audio Settings
Select Back
BACK
HDMI Settings
Input Settings
Network Settings
Bluetooth Settings
Zone Settings
What you can do with Easy Setup
Performing Auto Calibration
(D.C.A.C. EX)
Note
Loading ...
Loading ...
Loading ...