Loading ...
Loading ...
Loading ...
– 49 –
Care of your Microwave Oven
Turn the oven off and remove the power plug from the wall socket before cleaning.
The outside oven surfaces
should be cleaned with a
damp cloth. To prevent
damage to the operating parts
inside the oven, water should
not be allowed to seep into
the ventilation openings.
It is occasionally necessary
to remove the glass tray for
cleaning. Wash the tray in
warm sudsy water or in a
dishwasher.
Keep the inside of the oven clean. When
food splatters or spilled liquids adhere to
oven walls, wipe with a damp cloth. Mild
detergent may be used if the oven gets
very dirty. The use of harsh detergent or
abrasives is not recommended.
Do not allow the Control
Panel to become wet. Clean
with a soft, damp cloth. Do not
use detergents, abrasives or
spray-on cleaners on the
Control Panel. When cleaning
the Control Panel, leave oven
door open to prevent oven
from accidentally turning on.
After cleaning press Stop/
Reset Button to clear display
window.
If steam accumulates inside or around the outside
of the oven door, wipe with a soft cloth. This may
occur when the microwave oven is operated
under high humidity conditions and in no way
indicates malfunction of the unit.
The roller ring and oven cavity floor should be cleaned
regularly to avoid excessive noise. Simply wipe the
bottom surface of the oven with mild detergent, water
or window cleaner and dry. The roller ring may be
washed in mild sudsy water or dish washer. Cooking
vapors collect during repeated use but in no way affect
the bottom surface or roller ring wheels. When
removing the roller ring from cavity floor for cleaning,
be sure to replace in the proper position.
Note
1.
When it becomes necessary to replace the oven light, please consult a dealer to have it replaced.
2.
The oven should be cleaned regularly and any food deposits removed.
3.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass, since
they can scratch the surface, which may result in shattering of the glass.
Technical Specifi cations
Model
NN-SD38HS
Power Supply: 230 - 240 V, 50 Hz
Power Consumption: 4.9 A 1,150 W
Operating Frequency: 2,450 MHz
Output*: 1000 W
Outside Dimensions (W x H x D): 488 mm (W) x 279 mm (H) x 395 mm (D)
Oven Cavity Dimensions (W x H x D): 315 mm (W) x 206 mm (H) x 353 mm (D)
Overall Cavity Volume: 23 L
Glass Tray Diameter: Ø285 mm
Uncrated Weight: Approx. 9.5 k
g
* IEC Test Procedure
Specifi cations subject to change without notice.
As for the voltage requirement, the production month, country and serial number, please refer to the
identifi cation plate on the microwave oven.
F0003BW40QP_OI_08_170630.indd 49 2017/6/30 13:28:30
Loading ...
Loading ...
Loading ...