Loading ...
Loading ...
Loading ...
5
TOOLS YOU WILL NEED FOR INSTALLATION
Pencil Phillips-Head Screwdriver
Ruler or Straightedge Safety Glasses Saber Saw
Pipe Wrench 1/8Drill Bit & Electric or Hand Drill
ADVANCE PLANNING
Refer to “Installation Preparation” for information on appropriate placement and necessary clearances
when planning installation.
Avoid placing cabinetry directly above cooktop when possible.
If cabinetry is used above cooking surface:
——Use cabinets no more than 13deep.
——Maintain 30minimum clearance between cooktop and unprotected cabinets directly above cooktop.
——If clearance is less than 30”, protect cabinet bottoms with flame-retardant millboard at least 1/4thick, or
gypsum board at least 3/16” thick, covered with 28 gauge sheet steel or .02” thick copper.
——Clearance between cooktop and protected cabinetry must not be less than 24”.
——An exhaust hood that projects at least 5beyond front of cabinets can reduce risk of burns caused by
reaching over heated surface units.
——Working areas adjacent to the cooktop should have 18” minimum clearance between countertop and
cabinet bottom.
A 36or wider exhaust hood with 350 CFM or greater airflow rating is recommended for use over this
Monogram cooktop.
Installation must conform with local codes. In the absence of local codes, the gas cooktop must comply
with the National Fuel Gas Code, ANSI Z223.1, latest edition.
Gas supply should be located near the opening for this cooktop (see Preparing the Opening and Gas
Connection sections of this manual). The supply should provide natural gas at 7of water column
pressure (11of water column for LP gas) and a maximum of 14of water column for natural or LP gas.
The electric spark ignition feature for this model requires a 120V electrical power supply be located in
the immediate vicinity of this cooktop (see Electrical Connections section of this manual).
WB28T10185 High Altitude Kit: For operation above 5,000 feet, order WB28T10185 Conversion Kit.
This kit includes orifices for both LP and Natural Gas operation.
Loading ...
Loading ...
Loading ...