Loading ...
Loading ...
Loading ...
13
·Test each valve separately until all burners have been checked.
IMPORTANT: If the igniter electrodes continue to spark after all of the burners are lit, check that each
burner component is assembled and properly seated.
E． Burner ignition.
Cooktop Spark Ignition—When you turn the cooktop knob to LITE, the spark igniter makes a series of electric
sparks (ticking sounds) which light the burner. During a power failure, the burners will not light automatically.
In an emergency, a cooktop burner may be lit with a match by following the steps below.
WARNING: Lighting gas burners with a match is dangerous. You should match light the cooktop
burners only in an emergency.
·Light a match and hold the flame near the burner you want to light. Wooden matches work best.
·Push in and turn the control knob slowly. Be sure you are turning the correct knob for the burner you are
lighting.
NOTE: If the burner does not light within five seconds, turn the knob off and wait one minute before trying
again.
F. Turn on each burner. On LP models, flames should be blue in color but may have yellow tips.
Natural gas models should have soft, blue flames. The burner flames should not flutter or blow away
from the burner. The flame should be no less than 1/4″ on the lowest setting and no greater than
1-1/2” on highest setting.
Burners should be checked frequently.
WARNING: If you attempt to measure the flame, please use caution. Burns could result.
Loading ...
Loading ...
Loading ...