Loading ...
Loading ...
Loading ...
4
INSTALLATION PREPARATION
PRE-INSTALLATION CHECKLIST
1． When preparing cooktop opening, make sure the inside of the cabinet and the cooktop do not interfere
with each other. (See section on preparing the opening.)
2． Slide the cooktop out of the end of the box. Remove packaging materials, grate boxes, regulator and
5
literature package from the cooktop before beginning installation.
· Use the shipping carton as a pad to protect customer countertops or flooring
3． Remove Installation Instructions from literature package and read them carefully before you begin.
Be sure to place all literature, Owner’s Manual, Installations, etc. in a safe place for future reference.
4． Make sure you have all the tools and materials you need before starting the installation of the
cooktop.
5． Your home must provide the adequate electrical service needed to safely and properlyyou're your
cooktop. (Refer to section on electrical requirements.)
6． When installing your cooktop in your home, make sure all local codes and ordinances are followed
exactly as stated.
7． Make sure the wall coverings, countertop and cabinets around the cooktop can withstand heat (up to
200°F) generated by the cooktop.
PARTS INCLUDED： (2) Screws Regulator,
(2) Hold Down Brackets
MATERIALS YOU MAY NEED:
Joint Sealant Pipe Fittings Shut-Off Valve,
CSA-Approved Flexible Gas Line
1/2″Min. ID, 1/2″NPT Connection, 3-foot Maximum Length (Massachusetts Only)
Note: Purchase new line, do not use previously used flexible gas line.
Loading ...
Loading ...
Loading ...