Loading ...
Loading ...
Loading ...
en Before using for the first time
14
KBefore using for the first
time
Be f o r e usi ng for the fi rst ti me
Before you can use your new appliance, you must
make some settings. You must also clean the cooking
compartment and accessories.
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment when it is empty and with the
oven door closed.
Make sure that there is no leftover packaging, such as
polystyrene pellets, in the cooking compartment and
remove the adhesive tape that is in or on the appliance.
Before heating the appliance, wipe the smooth surfaces
in the cooking compartment with a soft, damp cloth.
Keep the kitchen ventilated while the appliance is
heating.
Apply the settings indicated below. You can find out
how to set the heating function and the temperature in
the next section. ~ "Operating the appliance"
on page 14
Switch off the appliance after the time indicated.
Once the cooking compartment has cooled down,
clean the smooth surfaces with soapy water and a dish
cloth.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1Operating the appliance
Oper at i ng the appl i ance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Hob
Switching the hob on and off
You can use the hotplate control knobs to switch the
hob on and off.
Applying hotplate settings
Use the hotplate control knobs to select the heat setting
for the hotplates. Press the control knob for the required
hotplate and turn it to the required heat setting.
Heat setting 1 = Lowest setting
Heat setting 6 = Highest setting
Note: Hotplate temperature is regulated by the heat
switching on and off.The heat may also switch on and
off at the highest setting.
This ensures e.g.:
■ sensitive components are protected from
overheating
■ the appliance is protected from electrical overload
■ better cooking results are achieved
Large dual-circuit hotplate and roasting zone
The size of these hotplates can be altered.
Switching on the large area
Turn the control knob to position 6 – where you will feel
a slight resistance – then continue turning to the õî
symbol = large dual-circuit hotplate or roasting zone
Then immediately turn it back to the required heat
setting.
Switching back to the small area
Turn the control knob to Û and configure again.
The small dual-circuit hotplate is particularly good for
heating small amounts of food.
Caution!
Never turn the knob beyond the õ/î symbol to Û.
Settings
Heating function
3D Hotair :
Temperature maximum
Time 1 hour
Loading ...
Loading ...
Loading ...