Loading ...
Loading ...
Loading ...
en Operating the appliance
16
Water&Rinse+
ë
Adjustment values:
Higher water level and additional rinse
cycles depending on the programme,
longer programme duration for
particularly sensitive skin and/or for
areas with very soft water.
The number of rinse cycles that the
appliance actually runs depends on the
number that is set as a basic setting for
the program in question.
Prewash
T
For heavily soiled laundry.
Notes
■ If intelligent dosage is selected, the
detergent will be dispensed
automatically for the prewash and
the main wash.
■ For heavily soiled laundry, medium i-
DOS dosing is usually sufficient
when selecting a programme with
pre-wash.
■ If dosing manually, allocate
detergent to the prewash and the
main wash. Place detergent for the
prewash in the drum and add
washing powder for the main wash
to the left-hand compartment.
1 Operating the
appliance
Operati ng the appliance
Preparing the washing
machine
Note: The washing machine must be
correctly installed and connected.
From ~ Page 34
1. Connect the mains plug.
2. Turn on the water tap.
3. Open the door.
4. Check that the drum is completely
drained. Drain if necessary.
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Cottons programme set at the
factory is then always displayed.
The current settings and programme
information light up at full brightness
and the display A flashes.
The settings that can be selected light
up at half brightness.
Notes
■ Temporary flashing of the displayÛ
informs you to run the programme
Drum Clean or any other
programme soon at a washing
temperature of at least 60 °C.
■ If the E 3 sec display flashes, the
childproof lock is active.
You must deactivate this first before
you can change settings or start the
programme. ~ Page 18
+1 + 1 rinse
+2 + 2 rinses
+3 + 3 rinses
off Setting deselected
Loading ...
Loading ...
Loading ...