Loading ...
Loading ...
Loading ...
715
Maintenance
1
2
3
4
5
6
7
8
9
1. Warm the engine up for a few min-
utes and then turn it off. Remove
the oil filler cap.
2. Raise and suitably support the
vehicle.
3. Drain the oil into a suitable con-
tainer by removing the oil drain
plug.
4. Remove the engine oil filter with
an oil filter wrench.
✽✽
NOTICE
Do not allow the oil filter gasket to
remain on the oil filter mounting
surface. This will cause oil leakage
and engine damage. Remove the old
gasket completely so that a new gas-
ket may be properly seated.
5. Use a clean rag to clean the oil fil-
ter mounting surface on the
engine.
6. Apply a small amount of engine oil
to the new oil filter O-ring seal.
CAUTION
• Both the oil and engine are
hot. Do not burn yourself.
• Keep all engine oil out of the
reach of children.
1SAE7016 1SAE7017
WARNING - Lifting your
vehicle
If you raise your vehicle, always
ensure that it is supported at all
four jacking or lift points for the
vehicle. Do not use jacks meant
for tire changes. Use only lift
equipment specifically recom-
mended for doing maintenance
work under the vehicle. Place
the vehicle and lift equipment
on a hard, level surface capable
of supporting the full weight of
the vehicle without moving or
deforming. If the support is not
stable, the vehicle could fall and
cause serious or fatal injuries.
Follow the instructions with the
lift device.
Loading ...
Loading ...
Loading ...