Loading ...
Loading ...
Loading ...
615
In case of an emergency
1
2
3
4
5
6
7
8
9
When towing your vehicle in an
emergency without wheel dollies :
1. Set the ignition switch in the ACC
position.
2. Place the transaxle shift lever in N
(Neutral).
3. Release the parking brake.
✽✽
NOTICE
Failure to place the transaxle shift
lever in N (Neutral) may cause inter-
nal damage to the transaxle.
Tie-down hook
(for flatbed towing)
Front towing hook
1. Open the rear hatch, and remove
the towing hook from the tool box.
2. Remove the hole cover pressing
the lower part of the cover on the
front bumper (➀).
3. Install the towing hook by turning it
clockwise into the hole until it is
fully secured (➁).
4. Remove the towing hook and
install the cover after use.
CAUTION
Do not use the hooks under the
front and rear of the vehicle for
towing purposes. These hooks
are designed ONLY for transport
tie-down. If the tie-down hooks
are used for towing, the tie-down
hooks will be damaged and this
could lead to serious injury.
1SAE40201SAE7105
1SAA40191SAE7104
Loading ...
Loading ...
Loading ...