Loading ...
Loading ...
3
IMPORTANT UNPACKING
INSTRUCTIONS
This package contains a Cuisinart Stainless
Steel 13-Cup Food Processor and accessories:
Large 13-cup work bowl, small 4.5-cup work
bowl, work bowl cover with multiple feed tubes
with interlock, accessory storage case, spatula
and instruction/recipe book.
CAUTION: THE CUTTING TOOLS HAVE VERY
SHARP EDGES.
To avoid injury when unpacking the parts, please
follow these instructions.
1. Place the box on a low table or on the floor
next to the kitchen counter where you intend
to keep the food processor. Be sure the box
is right side up.
2. Open top flaps – there will be a rectangular
block of packing material that holds the
processor parts, each fitted into a cavity.
3. Remove the instruction/recipe book.
4. Lift out the packing material.
5. Remove the base, the 13- and 4.5-cup work
bowls, and place the base on the counter
or table. Assemble the work bowls on the
base by placing them over the shaft, using
the handle to turn the work bowl clockwise
to lock it.
6. Always read the Assembly Instructions
thoroughly before using your food processor.
7. When ready to use your machine, unlock the
accessory storage case, lift the cover and
remove the clamshell to access the small
metal chopping/mixing blade, dough blade,
large metal chopping/mixing blade, stem
adapter, adjustable slicing disc, and
reversible shredding disc.
CAREFULLY REMOVE THE SMALL AND
LARGE METAL CHOPPING/MIXING BLADES
BY GRASPING THE CENTER HUB AND
LIFTING THEM STRAIGHT UP. NEVER
TOUCH THE BLADES, AS THEY ARE RAZOR
SHARP. CAREFULLY REMOVE THE
ADJUSTABLE SLICING DISC BY USING THE
PLASTIC HUB.
DO NOT TOUCH THE BLADE, IT IS VERY
SHARP.
Remember to lock the parts in the storage
case when not in use.
8. Save the shipping cartons and plastic foam
blocks. You will find them very useful if you
need to repack the processor for moving or
other shipment. NOTE: We recommend that
you visit our website, www.cuisinart.com for
a fast, efficient way to complete your
product registration.
Loading ...
Loading ...
Loading ...