Loading ...
Loading ...
Loading ...
Operating 55
Operating
3
y
This unit supports Bluetooth auto pairing.
However it does not operate in the case
below:
- When you restart this unit.
- When you disconnect this unit by yourself.
- When you disconnect this unit on the
connected Bluetooth device.
y
The sound may be interrupted when the
connection is interfered with by the some
other electronic wave.
y
You cannot control the Bluetooth device with
this unit.
y
Pairing is limited to “One” Bluetooth device.
Multi-Pairing is not supported.
y
Depending on the type of the device, you may
not be able to use the Bluetooth function.
y
You can enjoy using Bluetooth when using
Phone, MP3, Notebook, etc..
y
The more distance between the unit and the
bluetooth device, the lower the sound quality
becomes.
y
The Bluetooth connection will be
disconnected when the unit is turned off or
the Bluetooth device gets too far from the
unit.
y
If the Bluetooth connection is disconnected,
connect the Bluetooth device again.
y
When a Bluetooth device is not connected,
“BT READY” appears on the display window.
y
If you set the Wi-Fi function in the state
of unconnected network, Bluetooth
and Wireless TV Sound Sync may not be
connected.
,
Note
Other operations
DRC, Night, Auto volume, AV Sync setting can be
congured only on App or PC software.
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to on DRC menu.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this function
can adjust the delay time.
You can set the time between 0 and 300 ms on AV
Sync menu.
Using your TV remote control
You can control some functions of this unit by your
TV remote control even by other company’s product.
Controllable functions are volume up/down and
mute.
Press and hold OPTICAL on the remote control for
about 3 seconds. “ON - TV REMOTE” appears and
you can control this unit by your TV remote control.
To check the status of this function, press and hold
OPTICAL.
To turn off this function, press and hold HDMI on
the remote control for about 3 seconds. “OFF - TV
REMOTE” is scrolled.
Loading ...
Loading ...
Loading ...