Loading ...
Loading ...
Loading ...
wiper fluid with the screwdriver from the on‐
board vehicle tool kit.
2. Turn the cover counterclockwise and re‐
move.
3. Pull the bulb holder directly to the rear, ar‐
row 1, and remove.
4. Remove the bulb from the bulb holder.
5. Install the new bulb with bulb holder in re‐
verse order of removal.
In doing so, ensure that the bulb tab is cor‐
rectly positioned in the headlight housing and
the bulb holder perceptibly engages.
6. Close the headlight housing with the lid.
Make sure that the lid engages.
High beams/headlight flasher
55-watt bulb, H7.
1. Turn the cover counterclockwise and re‐
move.
2. Pull the bulb holder directly to the rear, ar‐
row 1, and remove.
3. Remove the bulb from the bulb holder.
4. Install the new bulb with bulb holder in re‐
verse order of removal.
In doing so, ensure that the bulb tab is cor‐
rectly positioned in the headlight housing and
the bulb holder perceptibly engages.
5. Close the headlight housing with the lid.
Make sure that the lid engages.
LED headlights
Follow the safety information, refer to page 262.
All bulbs and lights are made using LED technol‐
ogy.
In the case of a malfunction, contact a dealer's
service center or another qualified service center
or repair shop.
Seite 264
MOBILITY
Replacing components
264
Online Edition for Part no. 01402631131 - X/19
Loading ...
Loading ...
Loading ...