Loading ...
Loading ...
Loading ...
the pedals. Ensure that the floor mats are se‐
curely fastened again after they were removed,
for instance for cleaning.
Driving in wet conditions
When roads are wet, salted, or in heavy rain, gen‐
tly press the brake pedal every few miles.
Ensure that this action does not endanger other
traffic.
The heat generated during braking dries brake
discs and brake pads and protects them against
corrosion.
In this way braking efficiency will be available
when you need it.
Hills
General information
Drive long or steep downhill gradients in the gear
that requires least braking effort. Otherwise, the
brakes may overheat and reduce brake effi‐
ciency.
You can increase the engine's braking effect by
shifting down, going all the way to first gear, if
needed.
Safety information
Warning
Light but consistent brake pressure can lead to
high temperatures, brakes wearing out and
possibly even brake failure. There is a risk of
accident. Avoid placing excessive stress on the
brake system.
Warning
In idle state or with the engine switched off,
safety functions, for instance engine braking ef‐
fect, braking assistance and steering assis‐
tance, may not be available. There is a risk of
accident. Do not attempt to drive in idle state or
with the engine switched off.
Brake disc corrosion
Corrosion on the brake discs and contamination
on the brake pads are increased by the following
circumstances:
▷ Low mileage.
▷ Extended periods when the vehicle is not
used at all.
▷ Infrequent use of the brakes.
▷ Aggressive, acidic, or alkaline cleaning
agents.
Corrosion buildup on the brake discs will cause a
pulsating effect on the brakes in their response -
generally this cannot be corrected.
Condensation water under the
parked vehicle
When using the automatic climate control, con‐
densation water develops and collects under‐
neath the vehicle.
Driving on racetracks
Warning
The vehicle is not designed for use in motor
sport type competition. Excessive race track
operation in the limit range can result in the
sudden failure or malfunction of components.
There is a risk of accident. Do not operate the
vehicle excessively in the limit range. Pay atten‐
tion to anomalies of the vehicle, for instance
brake grinding, and stop race track operation
where required.
Higher mechanical and thermal loads during
racetrack operation lead to increased wear. This
wear is not covered by the warranty.
Seite 217
Things to remember when driving
DRIVING TIPS
217
Online Edition for Part no. 01402631131 - X/19
Loading ...
Loading ...
Loading ...