Loading ...
Loading ...
Loading ...
If the unit is to be stored for an extended period of time, take the
following actions before putting away the machine.
1. Empty the bucket of all water.
2. Clean the water bucket and bucket filter per instructions.
3. Allow water bucket to dry and reinstall.
4. Remove pump hose and store with unit.
To Release Hose: Hold the grey ring while pulling the hose to
remove.
Care and cleaning of the dehumidifier.
9
Storage
1. Hold grey ring in
2. Pull hose out
Bucket Filter
The bucket filter is located inside the bucket near the bottom. See
Figure 1. The filter should be checked when cleaning the bucket. If
the filter has any debris on it, gently remove the filter as described
below and rinse with warm water. Replace the filter in the bucket
once it is clean.
IMPORTANT: Be careful not to tear or damage filter during removal,
cleaning or replacement. Do not use the dishwasher to clean the
filter.
TO REMOVE THE FILTER:
1. Lift the handle to make the ends of the handle align with the
holes in the clasps. Push the handle towards one of the clasps
keeping the handle aligned with the clasp slots. Push the other
clasp away from the handle allowing the handle to be separated
from the clasp. Remove the handle from the other clasp.
See Figure 2.
2. Squeeze both clasp inward to disengage clasp clips from water
tank cover. Lift the cover upwards to remove. See Figure 3.
3. Lift the end of the filter upwards to remove the filter.
See Figure 4.
TO REPLACE THE FILTER:
4. Place large end of filter above tabs, press filter down firmly to
spread tabs. Once filter is between tabs press filter inward to
engage tabs into filter.
5. Replace water tank cover and handle.
Cover
Tabs
Filter
Figure 1 - Bucket Filter Location
Clasp
Clip
Handle
Figure 2
Figure 3
Figure 4
5RWDWHDQGOLIW¿OWHUXS
Loading ...
Loading ...
Loading ...