Loading ...
Loading ...
Loading ...
DRIVER ID (if equipped)
Press this control and use SELECT
to choose DRIVER 1 or DRIVER 2
when choosing operator selectable
features. Seat and mirror positions
and nine operator selectable features, found under the MENU and
VEHICLE HANDLING controls, will be saved to DRIVER 1 or DRIVER 2.
These will be automatically recalled when the drivers identify themselves
to the system with the remote entry transmitter (refer to Basic
Operation of Memory Profile System in this section) or selecting
DRIVER 1 or DRIVER 2 in the message center. When a vehicle setting is
changed, the message center will display “SAVED TO DRIVER 1 or
DRIVER 2” for 5 seconds to confirm the change has been made. Press
the SELECT to choose “OFF” for temporary position/setting changes
which will not be stored.
MENU
Press this control to change various
convenience settings throughout the
vehicle. Each press of the MENU
control will display the following:
• Traction control (returns to “ON” everytime vehicle is started).
• Express window (completely goes down with one touch on the power
switch).
• Auto lock (locks the doors when the vehicle reaches 5 km/h [3 mph]).
• Horn chirp (sounds horn one time whenever the doors are locked
using the remote transmitter).
• Seat access (moves seat back to aid entry/exit from the vehicle).
• Reverse mirrors (tilts the exterior mirrors downward to assist parking
using reverse).
• English/metric (changes the odometer and display readouts)
Press the SELECT control to change the settings to ON or OFF.
These settings will be saved to the vehicle not individualized settings.
Vehicles equipped with the DRIVER ID control, the settings will be saved
to DRIVER 1 or DRIVER 2.
DRIVER ID
MENU
Instrumentation
21
Loading ...
Loading ...
Loading ...